News

Three hours. Then the piece moves. Termoviv 600° Heat-Free is a single-component silicone paint for high temperatures, and it does something that almost no one in this family of products does: it dries in the air. No baking, no cooking, no cooling. The painted products move already approximately two to three hours after application. What…

A quote is done quickly when the numbers are clear. Here they are. VIVEPOX FONDO TIXO yields 4.5 m² per kg at 100µm dry thickness, with a dry residue of 76%: you measure the surface and you know how much product to order. 20% catalysis, application by brush, roller or spray. The colours: white RAL…

A quote is done quickly when the numbers are clear. Here they are. VIVEPOX FONDO TIXO yields 4.5 m² per kg at 100µm dry thickness, with a dry residue of 76%: you measure the surface and you know how much product to order. 20% catalysis, application by brush, roller or spray. The colours: white RAL…

There is a reason why you can find the same primer in carpentry, in a foundry and on a naval dock. Where the work is demanding, the enemy is always the same: corrosion. Only the forms it takes change: saltiness, chemical vapours, abrasion, bad weather. VIVEPOX FONDO TIXO was created for these environments: industrial mechanics…

What if you don’t have to wait between primer and finish? With VIVEPOX FONDO TIXO you can paint wet on wet. On two-component finishes there is no need to wait for the primer to dry completely: apply the primer and move on to the finish in the same work session. For production it means only…

When a paint job fails, everyone looks at the finish. It’s almost always what’s underneath that is to blame. Detachments, bubbles, rust that resurfaces after a few months: in most cases the problem is the wrong base for the support, poorly applied or skipped altogether to save a step. The primer is not an extra…

A base that stays where you put it, even at high thicknesses. It is thixotropy, and it is the heart of VIVEPOX FONDO TIXO. Its thixotropic modification does a simple thing: the product flows under the brush or spray, then regains body as soon as it is applied. No drips on vertical surfaces, no sagging…

On a vertical beam the thickness is everything. That’s where the bottom falls out. Anyone who paints carpentry knows this: on flat surfaces everything goes smoothly, then comes verticals, edges and boxed surfaces. Load the product to thicken it and the pouring starts; you put in little and you stay under spec. Result: bagging lines,…

The protection of the iron is decided on the first layer. Ours is called VIVEPOX FONDO TIXO. It is a two-component epoxy primer with a high concentration of zinc phosphates, corrosion inhibitors: it does not cover rust, it chemically prevents it on the ferrous surface where it originates. It is designed for those who work…

Rust never stops a car in its tracks. He consumes it one quote at a time. First it’s a bloom on a weld, then a joint that gets stuck, then extraordinary maintenance that wasn’t in the budget. And when the vehicle works outdoors or in an aggressive environment, the calculations run high. The point is…

A weekend in September is worth three in November. At least for your wood. The right time to protect doors, frames, beams and furniture is now, before the rains: dry wood, mild temperatures, fast drying. With DECORVIV the job is simple: ready to use, it can be applied directly to the surface, by brush or…

August ends today. Unfortunately, the holidays are over for you, the easy part is over for your wood. Doors, frames, beams and furniture spent three months under sun and storms. The fiber is dry, the color is tired. And now comes the worst season: rain, stagnating humidity, temperature changes. Dry wood in summer is a…