Gates, railings, shelving, frames: the metal carpentry undergoes painting in batches and with tight deadlines. Often there is the piece that needs to be assembled…
Gates, railings, shelving, frames: the metal carpentry undergoes painting in batches and with tight deadlines. Often there is the piece that needs to be assembled… https://vivcolor.com/wp-content/uploads/2026/06/Gates-railings-shelving-frames-the-metal-carpentry-undergoes-painting-in-819x1024.jpg 819 1024 Paints, Enamels and Coatings for Industry, Home, Hobby https://vivcolor.com/wp-content/uploads/2026/06/Gates-railings-shelving-frames-the-metal-carpentry-undergoes-painting-in-819x1024.jpgGates, railings, shelving, frames: the metal carpentry undergoes painting in batches and with tight deadlines. Often there is a piece that needs to be assembled on site at the beginning of the week, and in the workshop the processing window is just a few hours. Under these conditions every phase of the cycle counts. Apply the primer, let it dry, take the piece back for finishing, multiplied by dozens of components, it’s time that accumulates. There is a way of working where primer is not needed. On suitable ferrous and galvanized supports, a DTM product allows you to pass on the bare metal with a single coat and send the piece to dry immediately. For technical information: vivcolor@vivcolor.com #VivColor #Carpentry #VerniceMetallo #DTM #VerniciaturaIndustriale #CarpenteriaMetallica
