ACRIVIV 70.100 HS DTM

COD: HAG1C

Two-component acrylic finishing enamel HS

Tools: Spray

Dilution: Acrylic

Dilution for spray: 10-15 % acrylic

Dilution with roller: N/A

Yield: 8 m²/Kg

Dry residue: 68 ± 1% (weight)

CATALYSIS RATIO: 13%
HARDENER: HDR2.H002

For more information:

Write us an email

Call: 045 8581034

Description

Single-coat two-component glossy enamel with good weather resistance, good resistance to aggressive chemicals (detergents etc.), very low flammability (when fully cured), good elasticity, excellent gloss retention and high coverage. The enamel is particularly suitable for industrial use for the direct painting of certain plastic, metal, ferrous, galvanised sheet metal, etc. substrates or for overpainting substrates previously treated with a suitable primer. The applied film is glossy with an excellent scratch resistance. When ACRIVIV enamel is applied (completely dried and with a film free of imperfections), it registers a continuous heat resistance of approx. 90-100°C. Above this temperature, the technical characteristics of the product are not guaranteed.

CATALYSIS RATIO: 13%.
HARDENER: HDR2.H002